Synchronous Rectification MOSFET driver targets off-line adapters

July 17, 2018 //By Nick Flaherty
Synchronous Rectification MOSFET driver targets off-line adapters
Diodes has launched a Secondary Side Synchronous Rectification MOSFET Driver with increased efficiency for off-line power adapters delivering 5V to 20V DC from an AC supply.

The APR346 is designed to operate in Continuous Conduction Mode (CCM), Discontinuous Conduction Mode (DCM) and Quasi-Resonant mode (QR) to drive an external MOSFET.

Using Synchronous Rectification (SR) gives significantly higher performance and efficiency than diode-based secondary side rectification and is now preferred by power adapter manufacturers. The architecture is expected to form the basis of power adapters for notebooks, mobile phones and a range of other portable devices, many of which will be adopting the USB Type-C connector with PD (Power Delivery) capabilities. 

The APR346 requires very few additional components and, because it is designed to operate with an external MOSFET, it offers maximum design flexibility. With fast turn-on and turn-off times of 70ns and 100ns (typical) respectively, it achieves high performance through directly sensing the Drain-Source voltage of the external MOSFET and rapidly turning the MOSFET on or off according to demand from the load. A built-in minimum on-time of 1.6μs (typical) effectively blanks out any potential Drain voltage ringing to maintain efficient operation as the load current begins to flow through the channel. 

The APR346 is available in the small outline SOT26 package and is priced at $0.40 in 1000 units

www.diodes.com


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.