SMT DC-DC converter series with 1W single and dual outputs
Micropower Direct has launched a 1W DC-DC converter family in a miniature surface mount case for board level power distribution applications.
The ML100E series has forty one standard models, operating from 3.3, 5, 12 & 24 VDC inputs, providing outputs of 3.3, 5, 9, 12, 15, 24, ±5, ±9, ±12, ±15 or ±24 VDC. Standard features include short circuit protection, input/output isolation of 1,500 VDC, 85% efficiency and operation over the wide temp range of -40°C to +105°C. Isolation is 1.5kV. The MTBF of the ML100E series (per MIL HDBK 217F) is greater than 3.5 Mhours. All models are RoHS compliant.
The ML100E family is packaged in a miniature, SMT case measuring 13.2 x 8.5 x 7.0mm with an industry standard pin out. All models are available on tape/reel for use with automated production equipment. Operation for all models is specified over the wide operating temperature range of -40°C to 105°C (to 100°C with no derating) with no heat sink required. Cooling is by free-air convection.
All MicroPower Direct products are designed to provide long, reliable field life. Considerable attention is given to the proper selection, derating, and layout of all circuit components. In addition, extensive reliability screening is also performed on all modules as a routine part of our production process.
Related DC-DC converter articles
- 2W AND 3W WITH 20KV ISOLATION
- 1W CONVERTER IN SOT23-6 PACKAGE
- TDK CLAIMS WORLD’S SMALLEST POINT OF LOAD CONVERTER
- 2W CONVERTER HAS 4KV ISOLATION FOR INDUSTRIAL AND TEST