SIMO power management IC halves footprint

April 09, 2020 //By Nick Flaherty
The MAX77654 SIMO PMIC provides three outputs with one inductor at an efficiency of 91 per cent, boosting battery life by 20 per cent and halving the design footprint
The MAX77654 SIMO PMIC provides three outputs with one inductor at an efficiency of 91 per cent, boosting battery life by 20 per cent and halving the design footprint

Using a single inductor, multiple output (SIMO) architecture can halve the footprint of the power management in wearable and Internet of Things (IoT) designs. 

The MAX77654 SIMO PMIC provides three outputs with one inductor at an efficiency of 91 per cent, boosting battery life by 20 per cent.

The SIMO PMIC replaces three buck-boost converters and three inductors with a single converter and a single inductor. It also replaces two LDOs or load-switches, a battery charger and additional passives, resulting in the 50 per cent footprint reduction.

With a shutdown current of 500nA and a low supply current of 6µA with 5 regulators operating, designers can add more functions to ultra-low-power consumer wearable devices. The MAX77654 yields lower heat dissipation and reduces system board temperature by more than 20 degrees Celsius when compared against an alternative single inductor system power solution. Additionally, this SIMO PMIC provides superior output voltage ripple performance of less than 20mVp-p for noise sensitive rails.  

All of this leads to a 40 per cent reduction in components and 23 per cent lower BOM cost compared to discrete solutions.

“Size and power constraints are defining next-generation IoT consumer system designs, and engineers are finding it harder to cram all the high-performance demands and capabilities into these tiny form factors,” said Kevin Anderson, senior analyst for Power Semiconductors at market researcher Omdia. “SIMO PMIC design offers designers flexibility to add new capabilities while also reducing size and improving battery life.”

“Maxim Integrated’s breakthrough scalable SIMO PMIC, MAX77654, offers the smallest form factor solution with the highest system efficiency,” said Karthi Gopalan, director, Mobile Solutions Business Unit at Maxim Integrated. “The MAX77654 SIMO PMIC frees up board real estate to pack value-add modules such as voice commands, payment, GPS receivers, biometrics, gesture control, 3-D recognition and camera.”

The MAX77654 is available now for $2.00 (1000-up, FOB USA). The MAX77654EVKIT# evaluation kit is available for $105.

maxim.click/Maxim_SIMO

 


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.