Powerbox launches supercapacitor technology

June 13, 2018 // By Nick Flaherty
Housed within a 19” 2U chassis, the 29F-54V-60A integrates 22 supercapacitors, totalizing 29 Farad and a capacity of 2500W.
Powerbox, one of Europe’s largest power supply makers, has launched its first supercapacitor management technology, aiming at industrial and medical designs.

The S-CAP BOOST technology provides backup and peak power by combining the latest supercapacitor technology with intelligent control and monitoring. This is particularly suitable for high energy peaks for short periods or emergency backup purposes in applications where due to safety regulations, ithium Ion or acid batteries are not allowed.

S-CAP BOOST can be configured to charge and monitor supercapacitor banks to work as UPS, delivering backup power to allow safety operations to take place before shutdown or delivering high peak power for a short period without disturbing the main source or discharging/damaging the system battery in applications such as industrial or medical lasers, electric motor boosters or X-ray emission elements. 

Compared to lithium ion cells with a lifetime of 500 to 1,000 cycles, supercapacitors can sustain from 500,000 to 20,000,000 cycles, making that technology extremely relevant for applications requiring large amounts of charge /discharge cycles with high energy such as industrial or medical lasers with very tight control of the supercapacitors’ charge in order to optimize the energy stored between each cycle and high levels of safety and reliability.

Critical applications operating in hostile or confined environments are strictly regulated in terms of chemical and other hazardous risks, reducing or forbidding certain type of batteries. Those applications must have a power backup long enough to run alarms and safety shutdown processes. The S-CAP BOOST technology tightly controls the charging of the supercapacitors, from a single 2.8V cell to a wide range of assemblies delivering a specific voltage and energy required for a given application.

One example of a product built using Powerbox’s S-CAP BOOST technology is a 2500W backup unit developed for an industrial process-control computer installed in a very restricted area. Housed in a 19 inch 2U chassis, the 29F-54V-60A integrates 22 supercapacitors totaling 29 Farads and has a capacity of 2500W during 5 seconds at full load and 30 seconds at half-load. To optimize the cells charge, the 29F-54V-60A

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.