Failsafe chip varistors for automotive battery lines

August 07, 2020 //By Nick Flaherty
Failsafe chip varistors for automotive battery lines
TDK has launched a range of Open Mode chip varistors for electronic automotive assemblies that are directly connected to the battery.

The new chip varistors offer reliable protection against transient surge voltages according to ISO 7637-2, and meet the failsafe requirements according to the VW standard VW 80808. Even when subject to excessive bending stress, short-circuits are avoided, which is particularly important for unswitched battery terminals.

The new surge protection components are designed for an operating voltage of 14 V RMS or a maximum direct voltage of 16 V DC. The three types of the B725*0G1140S862 series are designed for surge currents of 120 A, 200 A and 400 A, with each 8/20 µs. Depending on the surge current capability, the chip varistors are available in sizes EIA 0805, 1206 and 1210, and are suitable for a wide temperature range of -55°C to +150°C.






TypeOrdering
code
Operating voltage, max. [V]Surge current, max. (8/20 µs) [A]Terminal voltage
[V]
VRMS VDC
CT0805S14BAUTOGOM_GB72510G1140S862141612042
CT1206S14BAUTOGOM_GB72520G1140S862141620040
CT1210S14BAUTOGOM_GB72530G1140S862141640040

Further information is at  www.tdk-electronics.tdk.com/en/ctvs

Related articles on varistors 

Other articles on eeNews Power


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.