50W GaN boost converter for backlights

October 19, 2021 // By Nick Flaherty
50W GaN boost converter for backlights
EPC has launched a 50W, 12 V to 60 V eGaN FET-based synchronous boost converter with 95.3 percent peak efficiency with low temperature rise with a simple, low-cost topology.

EPC has developed a 50W  bi-directional buck or reverse-boost converter design for lapton and PC monitor backlight applications.

The EPC9162 demonstration board features the 100 V EPC2052 for the synchronous converter and the EPC2038 in the synchronous bootstrap FET circuit. 

The EPC9162 is by default programmed as a boost converter operating at 12 V input to 60 V/50 W output.  However, the board can also be operated as a buck converter at 48 V input to 12 V/60 W output. The fast-switching speed of eGaN FETs significantly reduces switching losses for higher efficiency operation. To make it simple for a power supply designer to easily replicate this design, all supporting materials for this board including schematic, bills of materials, and Gerber files are available on the EPC website.

The peak efficiency from 12 V to 60 V/0.85 A is 95.3 percent and the light load efficiency is 86 percent with only a 40°C temperature rise despite the small size of the eGaN FETs.   

“In applications where light-load efficiency is critical, such as LED backlighting for laptops and monitors, the low switching losses of eGaN FETs provide high efficiency with very low temperature rise to prevent equipment overheating,” said Alex Lidow, CEO of EPC. “The synchronous boost topology is a simple, low-cost solution for power system designers.”

The EPC9162 demonstration board is priced at $284.20 each and is available for immediate delivery from Digi-Key.


Related articles

Other articles on eeNews Power

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.