3W to 30W DC converters boast efficiencies up to 90%

June 27, 2016 //By Julien Happich
3W to 30W DC converters boast efficiencies up to 90%
UK Power Conversion distributor PowerPax now stocks Mornsun's R3 Series of DC converters, covering an output range of 3W to 30W. This new series of converters meets the highest levels of efficiency with full load efficiency up to 90%, low load efficiency up to 78% and no load power consumption as low as 0.12W.

This range features both single and dual output models with single outputs from 3.3V DC - 24V DC and dual outputs in the range ±5V DC - ±24V DC. All outputs feature a start-up time which is typically significantly shorter than competitive converters. These converters feature 4:1 inputs with 9V DC - 36V DC and 18V DC - 75V DC available as standard with input to output isolation in the range 1.5KV DC to 6KV DC.

All models feature input under voltage, output over voltage, short circuit and over-current protection. The operating temperature range for R3 series products is -40°C to +85°C and they feature an MTBF of minimum 100Khrs to MIL-HDBK-217F at 25°C. All converters in this range are approved to UL/EN60950. This series features PCB mounting DIP packages and in addition optional mounts for chassis and DIN Rail mounting are available.

Lead time is typically 4 weeks and samples are generally available from stock.

Visit PowerPax at www.powerpaxuk.com

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.