1kW and 1.5kW supplies add standby voltage option

August 01, 2018 //By Nick Flaherty
1kW and 1.5kW supplies add standby voltage option
TDK has added ten models with a 5V 1A standby voltage option to its range of 1kW and 1.5kW industrial AC-DC power supplies.

TDK-Lambda RWS1000B and RWS1500B series are aimed at general industrial, communications, test and measurement and alternative energy applications and are available with 12V, 15V, 24V, 36V and 48V outputs. The isolated 5V standby voltage is present even when the main output is inhibited or in an overvoltage or overcurrent condition, and this can be used as an additional voltage or to keep key circuitry active during an energy saving ‘sleep’ mode - avoiding a complete system re-start.

In addition to the standby voltage, the 1000/1500W RWS-B power supplies can also be ordered with double sided board coating, reverse airflow, remote on/off, single wire current sharing and DC good and fan alarm signals.

The units are safety certified to IEC/EN/UL 60950-1 with CE marking for the Low Voltage, EMC and RoHS2 Directives. The units also comply with EN 55011-B and EN 55032-B conducted and radiated emissions, and meet the EN 61000-3-2 harmonics and IEC 61000-4 immunity standards.

www.uk.tdk-lambda.com/rws-b

 


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.