18kW bidirectional DC power supply for renewable energy test

May 13, 2020 //By Nick Flaherty
18kW bidirectional DC power supply for renewable energy test
The 62000D 18kW bidirectional DC power supply from Chroma Systems is aimed at renewable energy test systems and electric vehicles.

Chroma Systems Solutions has launched a bidirectional DC power supply for renewable energy test systems and electric vehicles.

The 62000D bidirectional DC power supply provides two-quadrant operation with positive current/positive voltage as well as negative current/positive voltage, enabling both DC power output and regenerative DC loading. The absorbed energy feeds back to the grid with a conversion efficiency up to 93% and can operate in constant voltage, constant current, and constant power modes.

Bidirectional DC power supplies are used for testing renewable energy power systems including PV/storage hybrid inverters, power conversion system (PCS) on charging/discharging, and can provide battery simulation. The unit is pre-compliant with LV123 and LV148 standards on EV component testing and is geared up for testing power components such as bidirectional on-board chargers (BOBC), bidirectional DC converters, and DC-AC motor driver, and power conversion simulation tests of batteries in both directions. The Chroma 62000D has a high-speed CV dynamic response slope that can be controlled to 180V/ms which is applicable to the electrical characteristics tests of many vehicle guidelines.

The 62000D series specify power ratings of 6kW, 12kW, and 18kW achieving 180kW in parallel and series operation. Voltages will range from 0~100V/600V/1200V/1800V with a current rating from 0~540A.

The 62000D bidirectional DC power supply series has a four times auto-ranging operation range making it possible to get a wider coverage of low voltage/high current and high voltage/low current with a device under test. When integrated into a standard ATE system or in a lab, one 62000D can replace multiple DC power supplies to save space and costs. With a transient response of less than 1.5ms, the 62000D achieves a seamless current conversion between the two quadrants.

Features include a smartphone-like touch screen display, the ability to connect to many types of remote interfaces, smart master/slave control mode that can connect 2-10 devices, and is packaged at a high density 18kW in 3U.

www.chromausa.com


Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.