MENU

Synthetic polymer blends pave way to lighter solar devices

Technology News |
By eeNews Europe

Today’s commercially produced solar panels use silicon cells to efficiently convert sunlight to energy. But silicon panels are too heavy to be used for energy-producing coatings for buildings and cars, or flexible and portable power supplies for use in remote areas. Polymer cells are better suited to these potential uses.

Researchers led by Yang Yang, the Carol and Lawrence E. Tannas Jr. Professor of Engineering at the UCLA Henry Samueli School of Engineering and Applied Science, demonstrated improvement in the architecture and performance of polymer cells. The group successfully blended different pairs of polymers – or synthetic plastics – to enable devices to absorb light from a larger part of the solar spectrum. The researchers also identified criteria that could lead to even greater solar cell efficiency and absorption of light as researchers develop new polymers.

The research was published in Nature Photonics.

Solar cells based on different materials or molecular structures show different potential in terms of efficiency, flexibility and cost-effectiveness, according to Yang, the principal investigator on the research and a member of the California NanoSystems Institute.

Silicon cells are the current choice for efficient energy conversion. Perovskite cells, developed during the last few years, show great promise in terms of efficiency, but are still being studied. Polymer cells, which have been studied for many years, have the advantage of being light and inexpensive to manufacture.

“As polymer solar cells become more efficient,” said Yang, “they could have a profound impact on our ability to tap the power of the sun.”

Over the years, researchers have invented polymers with different molecular structures in an effort to create materials that can absorb light from different parts of the solar spectrum. The researchers also have blended two or more polymers together on one device to further improve absorption. However, blending has not yielded great improvement.

In the new study, UCLA researchers demonstrated the problem could be solved by carefully selecting polymers with molecular structures that are compatible with each other.  Using different combinations of polymers and device architectures, they determined which blends improved the solar cells’ efficiency and which were incompatible with each other.

Related articles:

www.ucla.edu

News articles:

Can ‘baking powder’ effect boost solar cell efficiencies?

Polymer solar cell boosts power generation by 15 percent

Antireflective nanotextures create self-assembly surface for solar cells


Share:

Linked Articles
eeNews Power
10s