MENU

‘Sandwiching’ 2D atomic layers expands energy-storage material performance

‘Sandwiching’ 2D atomic layers expands energy-storage material performance

Technology News |
By eeNews Europe



The Drexel researchers are testing an array of new combinations to expand the options available to create faster, smaller, more efficient energy storage, advanced electronics and wear-resistant materials.

Led by postdoctoral researcher Babak Anasori, PhD, a team from Drexel’s Department of Materials Science and Engineering created the material-making method, that can sandwich 2-D sheets of elements that otherwise could not be combined in a stable way. And they proved its effectiveness by creating two entirely new, layered two-dimensional materials using molybdenum, titanium and carbon.

“By ‘sandwiching’ one or two atomic layers of a transition metal like titanium, between monoatomic layers of another metal, such as molybdenum, with carbon atoms holding them together, we discovered that a stable material can be produced,” sadi Anasori. “It was impossible to produce a 2-D material having just three or four molybdenum layers in such structures, but because we added the extra layer of titanium as a connector, we were able to synthesize them.”

The discovery, which was published in the journal ACS Nano, represents a way of combining elemental materials to form the building blocks of energy storage technology— such as batteries, capacitors and supercapacitors, as well as superstrong composites— like the ones used in phone cases and body armor. Each new combination of atom-thick layers presents new properties and researchers suspect that one, or more, of these new materials will exhibit energy storage and durability properties so disproportional to its size that it could revolutionize technology in the future.

“While it’s hard to say, at this point, exactly what will become of these new families of 2-D materials we’ve discovered, it is safe to say that this discovery enables the field of materials science and nanotechnology to move into an uncharted territory,” said Anasori.

Combining two-dimensional sheets of elements in an organized way to produce new materials has been the goal of Drexel nanomaterials researchers for more than a decade. Imposing this sort of organization at the atomic level is no easy task.

“Due to their structure and electric charge, certain elements just don’t ‘like’ to be combined,” said Anasori. “It’s like trying to stack magnets with the poles facing the same direction – you’re not going to be very successful and you’re going to be picking up a lot of flying magnets.”

The researchers’ new method for making two-dimensional materials allows for combining multiple different layers of elements for the first time.
 
The Drexel researchers circumvented the chemistry challenge with a material called a MAX phase, which was discovered by Distinguished Professor Michel W. Barsoum, PhD, head of the MAX/MXene Research Group, more than two decades ago. A MAX phase is like the primordial ooze that generated the first organisms — all the elements of the finished product are in the MAX phase, waiting for the researchers to impose some order.


That order was imposed by Michel W. Barsoum, PhD and Yury Gogotsi, PhD, Distinguished University and Trustee Chair professor in the College of Engineering and head of the Drexel Nanomaterials Group, when they first created a stable, two-dimensional, layered material called MXene in 2011.

To create MXenes, the researchers selectively extract layers of aluminum atoms from a block of MAX phase by etching them out with an acid.

“Think of MXene synthesis like separating layers of wood by dunking a plywood sheet into a chemical that dissolves the glue,” explained Anasori. “By putting a MAX phase in acid, we have been able to selectively etch away certain layers and turn the MAX phase into many thin 2-D sheets, which we call MXenes.”

As far as energy storage materials go, MXenes were a revelation. Prior to their discovery, graphene, which is a single sheet of carbon atoms, was the first two-dimensional material to be touted for its potential energy storage capabilities. But, as it was made up of only one element, carbon, graphene was difficult to modify in form and therefore had limited energy storage capabilities. The new MXenes have surfaces that can store more energy.

Four years later, the researchers have worked their way through the section of the Periodic Table with elements called ‘transition metals’, producing MAX phases and etching them into MXenes of various compositions all the while testing their energy storage properties.

Anasori’s discovery comes at a time when the group has encountered an obstacle on its progress through the table of elements.

“We had reached a bit of an impasse, when trying to produce a molybdenum containing MXenes,” Anasori said. “By adding titanium to the mix we managed to make an ordered molybdenum MAX phase, where the titanium atoms are in center and the molybdenum on the outside.

Drexel researchers have made several new layered MXene materials and predict that they can make as many as 25 new combinations using their new method for atomic ‘sandwiching’.
 
With the help of theoretical calculations done by researchers at the FIRST Energy Frontier Research Center at the Oak Ridge National Laboratory, Drexel’s team knows that, in principle, it can use the method to make as many as 25 new materials with combinations of transition metals, such as molybdenum and titanium, that previously wouldn’t have been attempted.

“Having the possibility to layer different elements at the thinnest form of material known to the scientific community leads to exciting new structures and allows unprecedented control over materials properties,” said Barsoum. “This new layering method gives researchers an unimaginable number of possibilities for tuning materials’ properties for a variety of high-tech applications.”

Anasori plans to make more materials by replacing titanium with other metals, such as vanadium, niobium, and tantalum, which could unearth a vein of new physical properties that support energy storage and other applications.

“This level of structural complexity, or layering, in 2-D materials has the potential to lead to many new structures with unique control over their properties,”explained  Gogotsi. “We see possible applications in thermoelectrics, batteries, catalysis, solar cells, electronic devices, structural composites and many other fields, enabling a new level of engineering on the atomic scale.”

Related articles and links:
 
drexel.edu

News articles:

Atomic shuffling pintpointed as failure trigger for rechargeable batteries

New class of layered materials drive PV innovations

Atomic scale imaging spurs high-temperature superconductor progress

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s