The REC8 and REC10 are low cost, high performance, regulated DIP24 converters available with 2:1 and 4:1 input voltage ranges and with single or dual outputs. The isolation grade is 2 kVDC as standard, with 3 kVDC offered as an option. The thermal design permits the 10W converter to have the full industrial ambient operating temperature range (free convection) of -40 to +85°C without derating, while the 12 W converter achieves a still respectable maximum operating temperature of +75°C.
The converters have efficiencies of up to 87% which remain consistent over the full input voltage range. In addition, the efficiency remains high with variable loads so that even with a 30% load, the conversion efficiency is still above 80%. The high reliability design offers an MTBF of up to 1.2 million hours.
The REC15 is a low cost, high performance, regulated 2×1 inch converter also available with 2:1 or 4:1 input voltage range and single or dual outputs. The isolation grade is 2 kVDC as standard, with 3 kVDC offered as an option. Due to its high efficiency, the 2:1 input 15 W converter has an ambient operating temperature range (free convection) of -40 to +71°C without derating. The converter features synchronous rectification for the higher current outputs and the standard output voltages have been slightly increased to 3.4 V and 5.1 V respectively to compensate for any voltage drops in the user’s application.
All of the REC8 to REC15 converters feature power limiting on the outputs, so hiccupping does not occur if an overload condition exists. The converters also feature very tight output voltage regulation, low output ripple/noise and have a remote enable pin fitted as standard, a useful feature for sequential power-up and shut-down.
Visit RECOM Power at www.recom-power.com