MENU

Pluggable PSUs are optimized for cPCI systems

New Products |
By eeNews Europe

All versions are 8HP wide and are available with either 18 – 36 VDC, 36 – 72 VDC or autoranging 85 – 264 VAC inputs to suit a wide variety of potential applications. 3U versions are rated at 200 or 300 W, 6U ones at 350, 400 or 500 W. In addition, the +12 V output is rated at 5 A and the -12 V at 1 A.

The units feature active power factor correction to achieve a typical power factor of 0.98, and efficiency is greater than 80% at full load. They are hot swappable, have high temperature shutdown with auto recovery, overload, over-voltage and short circuit protection and operate at full load up to 55°C without derating subject to forced air cooling at 250 linear feet/minute. Line regulation is ±0.5%, 3.3 V and 5 V load regulation ±1%, 5 V ripple is 60 mV p-p, 3.3 V ripple is 90 mV p-p.

All front panels are fitted with an EMI gasket and guide pin, protective ground, injector/extractors and keying to conform to IEEE 1101.10/11.

Visit Verotec at www.verotec.com


Share:

Linked Articles
eeNews Power
10s