Lowest noise, 16-bit 20-Msps ADCs achieve 84-dB SNR and 46-microvolt (RMS) input-referred noise

New Products |
By eeNews Europe

With 46 µVRMS input noise and maximum guaranteed INL error of ±2.3 LSB, these ADCs are suitable for low noise, high linearity sampling applications such as digital x-ray, infrared and medical imaging, pachymeters, spectrometry and cytometry. The devices achieve signal-to-noise ratio (SNR) performance of 84 dB and SFDR of 99dB at baseband. High AC performance and low noise is achieved using a well designed 2.1 Vp-p front end, which also lowers the power required by the ADC driver circuitry. The ADCs themselves consume approximately 80 mW/channel. Further power savings can be achieved by placing the devices in standby (12 mW) or shutdown (0.5 mW), making them ideal for handheld test and measurement applications.

The LTC2269 and LTC2270 are single-channel and two-channel simultaneous sampling parallel ADCs, respectively, offering a choice of full-rate CMOS, or double data rate (DDR) CMOS/LVDS digital outputs with programmable digital output timing, programmable LVDS output current and optional LVDS output termination. The LTC2271 includes two-channel, simultaneous sampling ADCs with serial LVDS outputs. They include Linear Technology’s digital output randomizer and alternate bit polarity (ABP) mode that minimize digital feedback in the application.

Availability and Pricing

The low power 16-bit ADCs provide a pin-compatible upgrade to the existing LTC2160, LTC2180, LTC2190 families of 25 Msps to 125 Msps 1.8 V low power ADCs. Available in compact QFN packages, designers can benefit from the flexible choice of interfaces to minimize pin count and ease routing to FPGAs. The ADCs are now in production, with evaluation boards and samples available online or from your local Linear Technology sales office. Pricing starts at $30.00 each for the single LTC2269 device in 1,000-piece quantities.

More information about the LTC2269, LTC2270 and LTC2271 ADC family at


Linked Articles
eeNews Power