Flip-chip 0805 resistor based on Z1 foil technology offer ultra-high precision benefits
The device alos has a low typical TCR of ±0.05 ppm/°C from 0°C to +60°C and ±0.2 ppm/°C from -55°C to +125°C (+25°C ref.); power TCR of 5 ppm at rated power; and tight tolerances to ±0.01%.
Based on VFR’s next-generation Bulk Metal Z1-Foil technology, the FRFC 0805 (foil resistor flip-chip) excelscompared with all previous stability standards for precision resistors with an order of magnitude improvement in high-temperature stability, load-life stability, and moisture resistance. These new benchmark levels of performance provide design engineers with the tools to build circuits not previously achievable while reducing costs and space in the most critical applications by eliminating the need for corrective circuitry and reducing the large land patterns needed for a wrap-around configuration. The device’s flip-chip configuration saves up to 35% PCB space compared with a surface-mount chip with wraparound terminations while also providing strain relief to eliminate cracked substrates and board delamination.
In addition to its remarkably improved load-life stability, the FRFC 0805 is noise-free and provides ESD protection of 25 kV or more for increased reliability. The device’s solid element alloy is matched to the substrate, forming a single entity with balanced resistance versus temperature characteristics for an unusually low and predictable TCR over a wide temperature range from -55°C to more than +125°C. The adhesive that holds the foil to the flat substrate withstands high temperatures, pulsing power, moisture incursions, shock and vibration, and low-temperature exposure while still holding securely to the foil element. Resistance patterns are photo-etched into the element to permit the trimming of resistance values to very tight tolerances as low as 0.01%.
The FRFC devices are qualified as anti-sulfurated resistors for use in environments with high levels of contamination. Such environments include alternative energy applications, industrial control systems, sensors, RTDs, electric instrumentation, weather and communication base stations, and any electronic appliance used in high concentrations of sulfur.
The FRFC 0805 offers a wide resistance range from 5 O to 8 kO. Any resistance value within this range is available at any tolerance with no additional cost or lead time effect. The resistor features power ratings to 200 mW at +70°C, a rise time of 1.0 ns with effectively no ringing, a thermal stabilization time of <1 s (within 10 ppm of steady state value), current noise of 0.010 µVrms/V of applied voltage (<-40 dB), and a voltage coefficient of <0.1 ppm/V. The RoHS-compliant device offers a non-inductive (<0.08 µH), non-capacitive design and is available in matched sets upon request.
Samples and production quantities of the FRFC 0805 are available now, with lead times of five working days for samples and five weeks for larger orders.
More information about the FRFC 0805 at www.vishaypg.com/ppg?63237
If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :
