MENU

860W quarter-brick DC-DC converter adds data recorder

860W quarter-brick DC-DC converter adds data recorder

Technology News |
By Nick Flaherty



Flex Power Modules is introducing a quarter-brick, non-isolated DC-DC converter rated at 860 W continuous and 1200 W peak power with a built-in data recorder.

The MBR350 is intended as an intermediate bus converter for powering processors and ASICs with peak power demands. The PMbus interface includes an ‘event data recorder’ which can be interrogated for analysis of stress conditions before converter shut-down.

The DC-DC converter has an input of 40-60 V (80 V/100 ms) and a fully regulated output of 12 V at 100 A maximum, adjustable from 8 V to 13.2 V. A transformer-coupled, non-isolated topology reduces component count and current stress and yields an efficiency level peaking at 97.8 percent  at half load 48 V input voltage. Derating for the BMR350 is characterized by the Flex Power Modules 3D thermal data graphs which specify available output power for given real-world pin and baseplate temperatures up to 100°C, with the user’s airflow rate. This enables maximum power to be extracted without stress to the converter.

For higher power levels, active current sharing between paralleled modules is an option. The BMR350 meets EMI standard EN 55032/FCC part 15J ‘Class B’ with a recommended external filter.
Full protection is included against output over-voltage, over-current and module over-temperature and a PMBus interface provides remote control and monitoring, supported by the Flex Power Designer software tool.

The BMR350 is in the standard quarter-brick format of 58.4 x 36.8 mm footprint with a height of just 12 mm, which includes the integrated baseplate with its threaded fixing holes. Terminations are via through-hole pins, suitable for pin-in-paste reflow, wave or manual soldering and positions are compatible with similar products on the market.

“We have adopted a novel approach with the BMR350 with its transformer-coupled, non-isolated topology. This keeps costs and component stresses low without compromising efficiency,” said Anders Sellin, Product Manager Flex Power Modules.

The BMR350 will be available in OEM quantities in the end of Q1 2022 with more variants following in 2022.

www.flex.com

Related Flex articles

Other articles on eeNews Power


 

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s