3D X-rays explore inside lithium batteries

Technology News |
By Nick Flaherty

Researchers at the University of Illinois have used 3D X-ray tomography of an electrode to better understand what is happening on the inside of a lithium ion battery and build batteries with more storage capacity and longer life.

When a lithium battery is being charged, lithium ions embed themselves into host particles in the graphite anode and are stored there until needed to produce energy during the battery discharge. The graphite particles expand as the lithium ions enter them during charging, and contract when the ions exit them during discharging.

“Every time a battery is charged, the lithium ions enter the graphite, causing it to expand by about 10 percent in size, which puts a lot of stress on the graphite particles,” said John Lambros, professor in the Department of Aerospace Engineering and director of the Advanced Materials Testing and Evaluation Laboratory (AMTEL) at the university. “As this expansion-contraction process continues with each successive charge-discharge cycle of the battery, the host particles begin to fragment and lose their capacity to store the lithium and may also separate from the surrounding matrix leading to loss of conductivity.

“If we can determine how the graphite particles fail in the interior of the electrode, we may be able to suppress these problems and learn how to extend the life of the battery. So we wanted to see in a working anode how the graphite particles expand when the lithium enters them. You can certainly let the process happen and then measure how much the electrode grows to see the global strain–but with the X-rays we can look inside the electrode and get internal local measurements of expansion as lithiation progresses.”

The team first custom built a rechargeable lithium cell that was transparent to X-rays. However, when they made the functioning electrode, in addition to graphite particles, they added another ingredient to the recipe–zirconia particles.

“The zirconia particles are inert to lithiation; they don’t absorb or store any lithium ions,” said Lambros. “However, for our experiment, the zirconia particles are indispensable: they serve as markers that show up as little dots in the X-rays which we can then track in subsequent X-ray scans to measure how much the electrode deformed at each point in its interior.”

Lambros said internal changes in the volume are measured using a Digital Volume Correlation (DVC) routine — a digital algorithm that compares the X-ray images before and after lithiation.

The software was created about 10 years ago by Mark Gates, a U of I computer science doctoral student co-advised by Lambros and by Michael Heath, who is in U of I’s Department of Computer Science. Gates improved upon existing DVC schemes by making some critical changes to the algorithm. Rather than only being able to solve very small-scale problems with a limited amount of data, Gates’ version incorporates parallel computations that run different parts of the program all at the same time and can produce results in a short time, over a large number of measurement points.

“Our code runs much faster and instead of just a few data points, it allows us to get about 150,000 data points, or measurement locations, inside the electrode,” Lambros said. “It also gives us an extremely high resolution and high fidelity.  Digital Volume Correlation programs are now available commercially, so they may become more common,” he said. “We’ve been using this technique for a decade now, but the novelty of this study is that we applied this technique that allows internal 3D measurement of strain to functioning battery electrodes to quantify their internal degradation.”

Related stories:


Linked Articles
eeNews Power