Bridging the gap between speed and power in asynchronous SRAMs

January 12, 2015 //By Anirban Sengupta and Reuben George
Bridging the gap between speed and power in asynchronous SRAMs
Anirban Sengupta and Reuben George of Cypress Semiconductor consider how to bridge the gap between speed and power in asynchronous SRAMs.

The Asynchronous SRAM space is divided between two very distinct product families – fast and low power – each with its own set of features, applications, and price. Fast Asynchronous SRAMs have faster access time, but consume more power. Low-power SRAMs save on power consumption, but have slower access time.

From a technological standpoint such a trade-off is justifiable. In low-power SRAMs, special Gate-induced Drain Leakage (GIDL) control techniques are employed to control stand-by current and thus standby power consumption. These techniques involve adding extra transistors in the pull-up or pull-down path, as a result of which access delay increases hence increasing access time. In Fast SRAMs, access time is the highest priority and hence such techniques cannot be used. Moreover, the transistors are scaled up in size to increase charge flow. This scaling-up reduces propagation delay but at the same time increases power consumption.

From the standpoint of application requirements, this trade-off has led to two distinct application bases. Fast SRAMs work well as a direct interface cache or scratchpad expansion memory for high-speed processors. Low-Power Asynchronous SRAMs are used to temporarily store data in systems where power consumption needs to be very low. Hence, while Fast SRAMs are typically used in high performance systems like servers and aeronautical devices, Low-Power SRAMs are used most in battery-powered devices like POS terminals and PLCs.

However, technological advancement is driving more wired devices to battery-backed mobile versions. For the past few years, we have also been witnessing the introduction of a plethora of wireless applications leading to a wireless gadget boom. This new generation of medical devices, handheld devices, consumer electronics products, communication systems and industrial controllers, all driven by the Internet of Things (IoT), is revolutionizing the way devices function and communicate. In such mobile devices, both Fast and Low-power SRAMs fail to service the need comprehensively. Fast SRAMs have high current consumption and thus drain the battery too quickly.

Design category: 

Vous êtes certain ?

Si vous désactivez les cookies, vous ne pouvez plus naviguer sur le site.

Vous allez être rediriger vers Google.