MENU

2W and 3W DC-DC converters in SIP-8 package in distribution

2W and 3W DC-DC converters in SIP-8 package in distribution

New Products |
By Nick Flaherty



The TEC 2, TEC 2(WI), TEC 3 and TEC 3(WI) series  have all been designed to deliver improvements in terms of cost, efficiency and performance compared to previously available 2W and 3W SIP-8 packaged DC-DC converters. Offering increases in efficiency of more than 20%, the converters enable a significant reduction of thermal loss and thereby allow an expanded operating temperature range of –40 to +90°C.

The converters offer fully regulated outputs from zero to 100% load, with no requirement for minimum load. The input-voltage range options have also been extended and now include 4.5 to 13.2V(DC). Models are also available with standard 2:1 input ranges, including 9 to 18, 18 to 36 and 36 to 75V(DC). The TEC 2WI and 3WI series also offer devices with ultra-wide 4:1 input-voltage ranges.

Other features include functional I/O isolation designed to meet IEC/EN 60950-1 with a test voltage of 1600V(DC) for 60 seconds, continuous short-circuit protection and remote on/off. They have a three-year product warranty.

The Traco Power TEC 2(WI) and 3(WI) converters are now shipping from RS in the EMEA and Asia Pacific regions.

uk.rs-online.com

If you enjoyed this article, you will like the following ones: don't miss them by subscribing to :    eeNews on Google News

Share:

Linked Articles
10s